Best Radon Mitigation Fans System: Top 6 Product in 2020 Reviews

Review

If you are looking for the quietest radon fan, check out the RadonAway Radon Mitigation Fan. It gives you great performance while being super quiet and energy-efficient. This is a great fan for a typical radon mitigation job.

Featuring seals that are sealed to inhibit leakage of radon, this fan is designed specifically for radon mitigation. The RadonAway Radon Mitigation Fan is also an attractive looking fan that is perfect for most sub-slab radon mitigation systems.

The RadonAway Radon Mitigation Fan is rated for both residential and commercial use and also meets all electrical code requirements. The motor is thermally protected while the motorized impeller is water-hardened.

What Customers Are Saying

Consumers like the durability of the RadonAway fan since you can expect a long-life span. They also like its low noise level and energy efficiency.

Pros/Cons

Review

Designed to control humidity levels and the temperature, the AC Infinity AIRTITAN T8 is a high-airflow ventilator fan that is installed into your garage, attic, basement, or crawlspace.

Reducing humidity levels in your home, this fan will help to stop mold growth and remove odors and Radon as well as other harmful pollutants from your house.It comes with a smart dehumidistat and thermostat that is control with an LCD display.

Featuring customizable fan speeds, this fan has a heavy-duty build that comes with IP-RR rated fans and a mounting frame made of stainless steel for durability.

The two included 120mm PWM-controlled DC fans are incredibly efficient and will maximize the airflow at low power and noise levels. It also comes with an eight-foot cord and hardware allowing you to mount the fan onto any surface and then power it with an outlet.

The AC Infinity comes with a controller that can program the fan to change the speed of the fan in response to different humidity levels and temperatures. You can also set it so that the fan on a timer set to your preferred speeds or to run continuously.

There is also an eco-mode, fan failure alerts, backup memory, and an alarm warning as well as a 12-foot corded sensor probe.

With the spiral fan guards and a heavy-duty stainless-steel casing, you are assured that the fan system is protected. DC motors control the fans to provide the most airflow while also reducing power consumption and noise. Thanks to the IP-44 rating, this fan is also resistant to dust and liquids.

What Customers Are Saying

Consumers that are looking for moisture control and ventilation in your basement and crawl space like this fan system for many of its features. Not only can it be adjusted to your preferences or in response to humidity and temperatures, but it lessens the level of humidity in your home while stopping the growth of mold.

Pros/Cons

Review

Providing an affordable and effective way to reduce the radon levels in your home, the Tjernlund PVC4 Radon Mitigation Fan is a unique system that includes an exterior hood, a plug-in fan, and PVC pipe that you will need to provide.

You can avoid having the PVC pipe run outside your home or through the living areas thanks to its sidewall system design that evacuates through a sidewall in the basement.

Engineered to lessen the amount of radon across a range of sub-slab soil types like gravel and dirt, the Tjernlund features a galvanized and sealed housing that is permanently lubricated with PSC.

This affordable radon mitigation fan can improve the performance of a passive radon mitigation system with very little power consumption. The included corrosion-proof aspiration control hood will dilute the radon gas with fresh air from outside when it exits the hood to safely propel it away from your home.

You can easily adjust the hood’s airflow velocity to accommodate the length of the pipe and whether you have the radon being drawn out below the basement floor or from a sump pit.

What Customers Are Saying

Consumers like the Tjernlund as a great choice for existing home retrofits. They like that this 16-watt fan connects directly to four-inch PVC, and it easily installs in about five minutes.

Pros/Cons

Review

Tailored to perform on a wide range of mitigation systems, the Fantech Rn2 Radon Fan employs a specialized fan to remove radon gas from under a building using a sealed pipe system. This type of system is created to get rid of radon gas before it can enter your home.

With a fully-sealed plastic housing, the RN2 is joined together using a vibration welding process that creates a fused seam that is incredibly tight, strong, and permanent.

With no adhesive or screws in the housing construction, this air-tight fan guarantees that it stays efficient and that it will not spill contaminants through the leakage.

There is also a large electrical wiring enclosure that is created inside the fan housing that makes electrical installation easier. And, it comes with a thermal overload safety feature that is protected with an automatic reset.

The RN2 is a UV resistant product that is UL listed for use in commercial applications. It also has a watertight electrical terminal box and UL listed durable plastic parts. It has life expectancy on the fan is between seven and ten years.

What Customers Are Saying

Consumers were very happy with how quiet the unit is. The customer service is also very responsive, and it is very easy to install.

Pros/Cons

Review

The Suncourt Radon Fan Mitigation Kit helps to eliminate potentially dangerous radon from your basement or house. This high-performance kit isn’t loud or noisy, but provides reliable, effective, and quiet radon removal. You can easily mount it outdoors or indoors to supporting structures or existing system piping with the provided mounting brackets.

Using 77-watts when it runs, the Suncourt Radon Fan Mitigation Kit features a properly balanced impeller that is paired with a powerful motor that is almost silent thanks to the included anti-vibration PVC couplers. Plus, it comes with an air pressure indicator that lets you monitor the air press in the line.

This UV resistant and watertight unit features thermal plastic resin housing that will not yellow. It is epoxy sealed for added durability and performance making it a good choice for either outdoor or indoor use. By simply changing the air pressure under your home, this specially designed radon fan can draw out radon gas while safely venting it out above your roofline.

Pros/Cons

Review

Featuring a noise reduction mounting system, the Fantech Slimline Radon Fan was created to make an installer’s work easier. It connects right to the system using a pipe through included connectors. The inlet connection to the fan is found on the back of the housing allowing it to connect to the pipe from where it coming through the wall.

Eliminating the need of having a pipe elbow, the Fantech Slimline Radon Fan can conceal the penetration of the wall from your view. With the discharge of the fan found on top of the connection, you can connect it right to the vertical pipe riser. Since it is factory sealed, this unit has a no-leak design, so you don’t have to worry about dangerous chemicals getting into your home.

The Fantech Slimline Radon Fan does not have an industrial appearance. Featuring a sleek housing that is neutral-colored, you will find that it contrasts less with the appearance of your home. It also includes connectors that are flexible, so they can isolate the natural vibration of the fan from your home and the system pipe.

What Customers Are Saying

Consumers find that this is an easy to use and set up product. They also appreciate the appearance of the unit and how well it blends in with its surroundings.

Pros/Cons

How To Choose A Radon Fan

Installation

Find a radon fan based on your home’s construction. This will determine where you install the unit outside or in your garage, attic, or basement. You can also install it under the foundation if your property is under construction.

You can either evaluate your location yourself using a DIY test kit or you can hire a mitigation contractor. If you find that you have a high radon level, you will want to install a radon mitigation system to vent the radon out of your house.

Radon Fan Sizing Guide

Low & Medium Power SSD Fans

Typically installed in new constructions, these types of fans are noiseless and durable. Using three to four-inch piping, they can accelerate exhaustion, but since they use little power, they can also save on electricity.

High Flow SSD Fans

Usually retrofitted into a property, this type of fan will prevent leakage and works under the foundation where the porous sub-slab layer exists. This fan uses four to six-inch piping exhausts, but six to ten inches are better for industrial applications.

Suction SSD Fans

Perfect for areas that have not so porous sub-slab materials, this type of fan has three-inch piping in several penetrations to efficiently pull out enough air.

Noise

Most people prefer that their radon mitigation fans do not make any noticeable sound. Typical wear and tear can lead to buzzing later on as bearings lose their lubrication. Otherwise, this type of unit should be pretty quiet.

Durability

What the entire system is made of it a large consideration. If you don’t have a durable fan or pipes, you won’t have your system for long.

Also you can use air ionizers to improve the air quality in your home.

Frequently Asked Question

How do I find out if I have radon gas in my home?

Typically, you will see symptoms and signs in your family if there is radon gas present, especially in your kids or the elderly. These signs can include loss of appetite, bronchitis, persistent cough, hoarseness, wheezing, and mild chest pain.

If there is prolonged radon exposure, it can eventually cause death with symptoms that go undetected.

If you feel your family is being affected by radon, you can purchase either an electronic radon gas detector or a manual radon gas test kit.

Both are affordable and convenient in helping to determine your initial radon levels. Then, if you feel that there is radon in your immediate home surroundings or your neighborhood, call a professional to help you with the situation.

What happens when I detect a leakage?

If you detect leaks, you can either fix it yourself or call for professional help. After you are aware of your home’s radon levels, you should install a radon mitigation fan system, which is a basic fan and pipe system that will remove radon particles from your house venting them out of your property.

Where do you install the radon mitigation system?

It will be installed in either the attic or basement of your home as they are the two main areas to be affected.

How long does installation take?

Typically, it will take about three to five hours to install the fan system.

Will you hear vibrations or sound?

At some level, the unit will make noise, but there will be no significant vibrations and only a negligible amount of noise.

Can you remove radon in other ways?

Typically, a radon mitigation process is used with sub-slab-depressurization. Other corrective measures can be used like sealing cracks, but they should be used along with the installation of the mitigation fan system.

How much does a mitigation system cost?

The cost can vary depending on the product or services you choose. Also, you need to consider if there is a pre-installed passive system as well as how complex your property is, which can decrease or increase the overall cost. On average, a system can run between $800 and $2000.

What is a safe radon level?

There are no safe radon levels when it comes to your family’s health. The standard acceptable number is 4 pCi/L with anything higher consider very dangerous.

There is a built-in passive radon removal system already in my home, is that enough?

Unfortunately, you will still need to install an active radon removal system in order to vent out the radon from the pipes and to lower the gas levels. A passive system is not successful on its own.